Hiclover supply medical waste incinerators with capacity 10kgs per hour to 500kgs per hour.  The incinerator with dual/double combustion chamber and dry filter chamber, two fuel burner from  Italy manufactured, hot sale model for small scale waste output, the capacity is 30kgs per hour  and 50kgs per hour. We are famous small scale incinerator manufacturer […]

Hiclover supply medical waste incinerators with capacity 10kgs per hour to 500kgs per hour.  The incinerator with dual/double combustion chamber and dry filter chamber, two fuel burner from  Italy manufactured, hot sale model for small scale waste output, the capacity is 30kgs per hour  and 50kgs per hour. We are famous small scale incinerator manufacturer […]

Medical waste is posing a growing problem all over the world, jeopardizing the health of staff, patients, disposal workers and anyone else coming into contact with the often hazardous materials discarded by hospitals and other healthcare sites. Hospital waste varies from site to site and the biggest challenge is to dispose of this wide range […]

Medical waste is posing a growing problem all over the world, jeopardizing the health of staff, patients, disposal workers and anyone else coming into contact with the often hazardous materials discarded by hospitals and other healthcare sites. Hospital waste varies from site to site and the biggest challenge is to dispose of this wide range […]

Medical waste is posing a growing problem all over the world, jeopardizing the health of staff, patients, disposal workers and anyone else coming into contact with the often hazardous materials discarded by hospitals and other healthcare sites. Hospital waste varies from site to site and the biggest challenge is to dispose of this wide range […]

  1.   Capacity of destruction in weight: 60 Kg/h. 2.   It should be able to operate not less than 10 hours/day 3.  This incinerator must be able to destruct all combustible wastes produced by hospitals,      private clinics, laboratories, institutes, etc… 4.  Design Specification : Types A, B, C, D, and E of medical waste […]

  1.   Capacity of destruction in weight: 60 Kg/h. 2.   It should be able to operate not less than 10 hours/day 3.  This incinerator must be able to destruct all combustible wastes produced by hospitals,      private clinics, laboratories, institutes, etc… 4.  Design Specification : Types A, B, C, D, and E of medical waste […]

Top Loader incinerator of general, medical and dry waste to comply with the requirements of the Air Quality Act, 2004 (Act No 39 of 2004)   1 Design standard Retort type, multiple 2 Description of chimney Top mounted, self supporting, unlined 3 Stack height from base At least 11 meter (depends on height above sea […]

All the incinerators to be supplied and installed must meet the Government of Kenya waste Management Regulation 2006 in particular 3rd schedule regulation (26, 47) pertaining classification, standards, criteria, and procedure for installing/operating incinerators as authored by the National Environmental Management and Coordination (waste management) regulation 2006, legal notice No. 121 of 29th September 2006The capacity of the incinerator required should be to the specifications with a capacity to burn 100kgs/HrThe incinerator shall be run on a 3-phase power supply (mains)For the technical evaluation, not only the treatment plant but the entire system will be considered.  It will be the responsibility of the Bidder to supply a full system, including all eventually additionally necessary secondary systems and additional equipment.The system offered shall be designed to operate normally under the conditions of the purchaser’s country. The conditions include Power Supply, Climate, Temperature, Humidity, etc.Hospital Incinerators to Nema standards  The following are the incinerator specifications :-      Waste type:      Mixed type 0,1,2,3 & 4 hospital/clinical bio hazard waste      Waste density:   125 to 350Kg/M³      Waste CV:        4000 KCAL/Kg      Moisture content:   10-25%      Estimated ash residue: 5-10%      Nominal capacity:   100Kg/hour batch load      Secondary chamber:  2 second @ 1100ºCThe Incinerator must comprise of: –      Manual Loading door (heavy duty steel door with appropriate refractory lining)      Horizontal solid hearth, refractory lined primary combustion chamber 800mm diameter x 2100mm long      Full sized bulk load/ash removal door      1 off diesel-fired ignition burner – temperature controlled      1 off combustion air supply fan and distribution system, automatic control      High capacity secondary combustion chamber 2 second @ 1100ºC with      1 off diesel-fired afterburner – temperature controlled      Control Panel – automatic operation      Temperature indication primary and secondary chambers 0-1200ºC. Both chambers must be insulated with refractory material (super duty 100mm thick firebrick with 25mm thick calcium silicate insulation)      Refractory lined flanged chimney to a height of 10M and it must be 3m above the height of any existing roof adjacent to the incinerator

An Incinerator is to be supplied by the Contractor on a rental basis at a location established by the Company. The Contractor is to provide trained and competent personnel with initial installation, commissioning and operational training under the supervision of the manufacturer’s technician. The incinerator is to be maintained and operated to manufacturer’s specifications by trained personnel. Contractor must have sufficient personnel trained and competent to operate the incinerator throughout the contract period. Specifications for the incinerator are attached in Appendix A. Incinerator Use/Ash Collection Incinerators used will be limited to daylight hours of operation. This includes shutdown, cleaning and maintenance. Waste streams shall not be mixed during the incineration process and the ash collection chamber will be cleaned when a different waste stream is to be incinerated. The Company will provide the contractor with a list of items that can be incinerated. All ash will be collected and stored in individual storage bins for each particular waste stream. The bins are to be provided by the contractor to the same design as the storage bins for the raw waste streams and include a lid design that prevents contamination from water. Ash from each waste stream will be sent for laboratory analysis after each initial incineration by the Company and at intervals decided by the Company thereafter. Contractor will be required to collect ash samples for analysis as directed by the Company. The Contractor will be responsible for the security of samples taken to prevent contamination until collection by the Company or designated courier. Ash will be disposed of at the direction of the Company. It is the responsibility of the Contractor to ensure the ash is not compromised until final disposal. Company will provide additional storage area for ash if and as required.